
ZTE-AN-CHASSIS-MIB    DEFINITIONS ::= BEGIN
    IMPORTS     
        RowStatus                         FROM SNMPv2-TC
        DisplayString                     FROM SNMPv2-TC
        TruthValue                        FROM SNMPv2-TC
        DateAndTime                       FROM SNMPv2-TC
        MODULE-IDENTITY                   FROM SNMPv2-SMI
        OBJECT-TYPE                       FROM SNMPv2-SMI 
        Integer32                         FROM SNMPv2-SMI
        NOTIFICATION-TYPE                 FROM SNMPv2-SMI                    
        zxAccessNode                      FROM ZTE-AN-SMI
        zxAnEquipment                     FROM ZTE-AN-SMI
        MODULE-COMPLIANCE                 FROM SNMPv2-CONF
        OBJECT-GROUP                      FROM SNMPv2-CONF
        NOTIFICATION-GROUP                FROM SNMPv2-CONF;

    zxAnChassisMib    MODULE-IDENTITY
        LAST-UPDATED    "201405220000Z"
        ORGANIZATION    "ZTE Corporation"
        CONTACT-INFO    "Dai YiDong      ZTE Corporation
                         Mail: dai.yidong1@zte.com.cn
                         Tel : +86-21-68897315"
        DESCRIPTION     "This MIB defines zte Access Node chassis managed objects."
        
        REVISION        "201405220000Z"
        DESCRIPTION
        "Add the 'unauthorized' status of the card and the power saving 
        enabling of the card."
        REVISION        "201405140000Z"
        DESCRIPTION
        "Add the last startup time of the card."
        REVISION        "201105260000Z"
        DESCRIPTION
        "Initial version of this MIB module."
        ::=  {  zxAnEquipment  1  }  
    
-------------------------------------------------------------------------------
-- Following management objects are defined.
-- 1. Chassis Global Objects
-- 2. Rack Properties Table
-- 3. Shelf Properties Table
-- 4. Card Properties Table
-- 5. Subcard Properties Table
-- 6. Card CPU Properties Table
-- 7. Storage Device Properties Table

-- Following notification objects are defined.
-- 21. zxAnChassisSysTraps
-- 22. zxAnChassisCardTraps
-- 23. zxAnChassisSubcardTraps

-- Following conformance information is defined.
-- 31. zxAnChassisConformance
-------------------------------------------------------------------------------

    zxAnChassisGlobalObjects  OBJECT IDENTIFIER   ::=  {  zxAnChassisMib   1  }
    zxAnChassisObjects        OBJECT IDENTIFIER   ::=  {  zxAnChassisMib   2  }
    zxAnChassisNotifications  OBJECT IDENTIFIER   ::=  {  zxAnChassisMib   3  }

    zxAnChassisSysTraps  OBJECT IDENTIFIER ::= {  zxAnChassisNotifications 1  }
    zxAnChassisCardTraps OBJECT IDENTIFIER ::= {  zxAnChassisNotifications 2  }
    zxAnChassisSubcardTraps OBJECT IDENTIFIER ::= { zxAnChassisNotifications 3 }
    
-------------------------------------------------------------------------------
-- 1. Chassis Global
-------------------------------------------------------------------------------
    zxAnChassisSysReboot    OBJECT-TYPE 
       SYNTAX             INTEGER  
          { 
              rebootSystem (1)
          } 
       MAX-ACCESS       read-write
       STATUS           current
       DESCRIPTION      "Reboot system."
       ::=  {  zxAnChassisGlobalObjects  1  }

    zxAnChassisSysLastRebootReason    OBJECT-TYPE 
       SYNTAX             INTEGER  
          { 
              byCli(1),
              byNms(2),
              byWatchdog(3),
              byPowerOff(4),
              bySoftwareRestart(5),
              byProcessSuspended(6), 
              unknown (99)
          } 
       MAX-ACCESS       read-only
       STATUS           current
       DESCRIPTION      "It indicates device coldstart or warmstart reason
                         byCli(1)       warmstart by command,
                         byNms(2)       warmstart by network management,
                         byWatchdog(3)  warmstart by watchdog,
                         byPowerOff(4)  coldstart by poweroff,
                         byProcessSuspended(6)  warmstart by process suspended,
                         unknown (99)   restart by other reason."
       ::=  {  zxAnChassisGlobalObjects  2  }

    zxAnChassisSysLastSwapReason  OBJECT-TYPE 
        SYNTAX      INTEGER
            {
            forced(1),
            cardOffline(2),
            reset(3),
            cardDown(99)
            }
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION "Last swap request,such as force,plug-out or others.
                     forced(1)       swap by command or network management,
                     cardOffline(2)  swap by the main control board poweroff 
                                     or pull out,
                     reset(3)        swap by the main control board reset self,
                     cardDown(99)    swap by other reason."
        ::=  {  zxAnChassisGlobalObjects  3  }          

   zxAnChassisPnpMode  OBJECT-TYPE 
        SYNTAX      INTEGER
            {
            enabled(1),
            disabled(2)
            
            }
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION "config Ne card PNP mode,PNP mode means when card on shelf,
                    then this card can use without add it"
        ::=  {  zxAnChassisGlobalObjects  4  }
       
-------------------------------------------------------------------------------
-- 2.Rack properties table
-------------------------------------------------------------------------------
    zxAnRackTable   OBJECT-TYPE
        SYNTAX      SEQUENCE  OF  ZxAnRackEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION "This table includes the enable or disable plug and play of 
                    the rack."
        ::=  { zxAnChassisObjects  2 }

    zxAnRackEntry   OBJECT-TYPE
        SYNTAX      ZxAnRackEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION "An entry in zxAnRackTable."
        INDEX       {  zxAnRack  }
        ::=  { zxAnRackTable 1 }

    ZxAnRackEntry  ::=  SEQUENCE {
        zxAnRack            Integer32,
        zxAnRackActualType   Integer32,
        zxAnRackConfType       Integer32,
        zxAnRackInvSn         DisplayString,
        zxAnRackRowStatus     RowStatus
        }

    zxAnRack          OBJECT-TYPE 
        SYNTAX          Integer32
        MAX-ACCESS      not-accessible
        STATUS          current
        DESCRIPTION     "The range of zxAnRack is 1~1 for DT"
        ::=  {  zxAnRackEntry  1  }

    zxAnRackActualType     OBJECT-TYPE 
        SYNTAX          Integer32
        MAX-ACCESS      read-only
        STATUS          current
        DESCRIPTION     "This MIB is defined for actual rack type."
        ::=  {  zxAnRackEntry  2  }

    zxAnRackConfType     OBJECT-TYPE 
        SYNTAX          Integer32
        MAX-ACCESS      read-create
        STATUS          current
        DESCRIPTION     "This MIB is defined for configged rack type."
        ::=  {  zxAnRackEntry  3  }


    zxAnRackInvSn     OBJECT-TYPE 
        SYNTAX          DisplayString  ( SIZE ( 0 .. 32  ) )
        MAX-ACCESS      read-create
        STATUS          current
        DESCRIPTION     "This MIB is defined for serial number of this rack.
              it is used by inventroy management."
        ::=  {  zxAnRackEntry  4  }


    zxAnRackRowStatus  OBJECT-TYPE 
        SYNTAX          RowStatus
        MAX-ACCESS      read-create
        STATUS          current
        DESCRIPTION     "The status of this conceptual row.

             To create a row in this table, a manager must
             set this object to createAndGo(4).
          
             In particular, a newly created row cannot be created
             until the corresponding zxAnRackConfType have been set.
             
             To delete a row in this table, a manager must
             set this object to destroy(6). "
        ::=  {  zxAnRackEntry  50  }   


-------------------------------------------------------------------------------
-- 2.Shelf properties table
-------------------------------------------------------------------------------
    zxAnShelfTable   OBJECT-TYPE
        SYNTAX      SEQUENCE  OF  ZxAnShelfEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION "This table includes the enable or disable plug and play of 
                    the shelf."
        ::=  { zxAnChassisObjects  3 }

    zxAnShelfEntry   OBJECT-TYPE
        SYNTAX      ZxAnShelfEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION "An entry in zxAnShelfTable."
        INDEX       {  zxAnRack,zxAnShelf  }
        ::=  { zxAnShelfTable 1 }

    ZxAnShelfEntry  ::=  SEQUENCE {
        zxAnShelf             Integer32,
        zxAnShelfHardwareVersion             DisplayString,
        zxAnShelfActualType        Integer32,
        zxAnShelfConfType       Integer32,
        zxAnShelfInvSn          DisplayString,
        zxAnShelfCleiCode       DisplayString,
        zxAnLogicShelfNo        Integer32,
        zxAnShelfRowStatus      RowStatus
        }
        
    zxAnShelf         OBJECT-TYPE 
        SYNTAX          Integer32
        MAX-ACCESS      not-accessible
        STATUS          current
        DESCRIPTION     "The range of zxAnShelf is 1~1 for DT"
        ::=  {  zxAnShelfEntry  1  } 
    
    zxAnShelfHardwareVersion OBJECT-TYPE 
        SYNTAX          DisplayString  ( SIZE ( 0 .. 64  ) )
        MAX-ACCESS      read-only
        STATUS          current
        DESCRIPTION     "The hard driver on the shelf."
        ::=  {  zxAnShelfEntry  2  }

    zxAnShelfActualType    OBJECT-TYPE 
        SYNTAX          Integer32
        MAX-ACCESS      read-only
        STATUS          current
        DESCRIPTION     "The actual shelf type."
        ::=  {  zxAnShelfEntry  3  }

    zxAnShelfConfType    OBJECT-TYPE 
        SYNTAX          Integer32
        MAX-ACCESS      read-create
        STATUS          current
        DESCRIPTION     "The configuration shelf type."
        ::=  {  zxAnShelfEntry  4  }


    zxAnShelfInvSn     OBJECT-TYPE 
        SYNTAX          DisplayString  ( SIZE ( 0 .. 32  ) )
        MAX-ACCESS      read-create
        STATUS          current
        DESCRIPTION     "The serial number of this shelf.
                        it is used by inventroy management."
        ::=  {  zxAnShelfEntry  5  }


    zxAnShelfCleiCode     OBJECT-TYPE 
        SYNTAX          DisplayString  ( SIZE ( 0 .. 64  ) )
        MAX-ACCESS      read-only
        STATUS          current
        DESCRIPTION     "The CLEI code of this Shelf.
                         it is used by inventroy management.Please reference 
                        http://www.commonlanguage.com to get knowledge about 
                        CLEI code. 
                        "
        REFERENCE "http://www.commonlanguage.com"              
        ::=  {  zxAnShelfEntry  6  }
    
    zxAnLogicShelfNo     OBJECT-TYPE 
        SYNTAX          Integer32
        MAX-ACCESS      read-create
        STATUS          current
        DESCRIPTION     "The logic Shelf number"
        ::=  {  zxAnShelfEntry  7  }    
        
    zxAnShelfRowStatus  OBJECT-TYPE 
        SYNTAX          RowStatus
        MAX-ACCESS      read-create
        STATUS          current
        DESCRIPTION     "The status of this conceptual row.

             To create a row in this table, a manager must
             set this object to createAndGo(4).
          
             In particular, a newly created row cannot be created
             until the corresponding zxAnShelfConfType have been set.
             
             To delete a row in this table, a manager must
             set this object to destroy(6). "
        ::=  {  zxAnShelfEntry  50  }   


-------------------------------------------------------------------------------
-- 3.Card properties table
-------------------------------------------------------------------------------
    zxAnCardTable   OBJECT-TYPE
        SYNTAX      SEQUENCE  OF  ZxAnCardEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION "This table includes the enable or disable plug and play of 
                    the Card."
        ::=  { zxAnChassisObjects  4 }

    zxAnCardEntry   OBJECT-TYPE
        SYNTAX      ZxAnCardEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION "An entry in zxAnCardTable."
        INDEX       {  zxAnRack, zxAnShelf, zxAnSlot  }
        ::=  { zxAnCardTable 1 }

     ZxAnCardEntry  ::=  SEQUENCE {
        zxAnSlot                      Integer32,
        zxAnCardConfMainType          Integer32,
        zxAnCardActualMainType        Integer32,
        zxAnCardActualType            DisplayString,
        zxAnCardOperStatus            INTEGER,
        zxAnCardAdminStatus           INTEGER,     
        zxAnCardPortNums              Integer32,
        zxAnCardActivePortNums        Integer32,
        zxAnCardCpuLoad               Integer32,
        zxAnCardCpuLoadThreshold      Integer32,
        zxAnCardMemUsage              Integer32,
        zxAnCardMemUsageThreshold     Integer32,
        zxAnCardStandbyStatus         INTEGER,
        zxAnCardInvSn                 DisplayString,
        zxAnCardCleiCode              DisplayString,
        zxAnCardAccessoriesType       DisplayString,
        zxAnCardAccessoriesOperStatus INTEGER,
        zxAnCardMemSize               Integer32,
        zxAnCardAvailableStorageSize  Integer32,
        zxAnCardTotalStorageSize      Integer32,
        zxAnCardHardwareVersion       DisplayString,
        zxAnCardPowerSavingEnable     INTEGER,
        zxAnCardLastStartupTime       DateAndTime,
        zxAnCardCpldVersion           DisplayString,
        zxAnCardFirmwareVersion       DisplayString,
        zxAnCardOtherFirmwareVersions DisplayString,
        zxAnCardRowStatus             RowStatus
        }

    zxAnSlot                    OBJECT-TYPE 
        SYNTAX          Integer32
        MAX-ACCESS      not-accessible
        STATUS          current
        DESCRIPTION     "The range of zxAnSlot is 0~20 for DT IEC-SHELF,
                         and  the range of zxAnSlot is 0~22 for DT ETSI-SHELF
                        "
        ::=  {  zxAnCardEntry  1  }


    zxAnCardConfMainType        OBJECT-TYPE 
        SYNTAX          Integer32
        MAX-ACCESS      read-create
        STATUS          current
        DESCRIPTION     "The main card type to config on the slot. Main card 
                        type indicates the category of hardware, such as 
                        64-ports adsl card,4-ports ethernet card."
        ::=  {  zxAnCardEntry  2  }


    zxAnCardActualMainType      OBJECT-TYPE 
        SYNTAX          Integer32
        MAX-ACCESS      read-only
        STATUS          current
        DESCRIPTION     "The actually main card type on the slot."
        ::=  {  zxAnCardEntry  3  }


    zxAnCardActualType          OBJECT-TYPE 
        SYNTAX          DisplayString  ( SIZE ( 0 .. 32  ) ) 
        MAX-ACCESS      read-only
        STATUS          current
        DESCRIPTION     "The actually card type on the  slot. Card type 
                        indicates the type of detailed hardware,such as ATUGA
                        and ATUGB, they'er all 32-ports Adsl card and they all 
                        provide general Adsl service,but they have different 
                        chips.
                      
           NOTE: The value of this variable MUST abide by ZTE'S  
                 discipline for card naming.And It MUST capital letters. 
           "
        ::=  {  zxAnCardEntry  4  }


    zxAnCardOperStatus          OBJECT-TYPE 
        SYNTAX          INTEGER
            {
             inService   (1),
             notInService(2),
             hwOnline(3),
             hwOffline(4),
             configuring(5),
             configFailed(6),
             typeMismatch(7),
             deactived(8),
             faulty(9),
             invalid(10),
             noPower(11),
             unauthorized(12),
             powerSaving(34)             
            }
        MAX-ACCESS      read-only
        STATUS          current
        DESCRIPTION     "This MIB is defined for the card status.

          inService(1)   --  card plugged in,running normally and service is 
                             being provided normally.
          notInService(2)--  card plugged in,running normally but service is 
                             stopped.
          hwOnline(3)    --  card plugged in and card communication is ok, but 
                             software isn't running now.
          hwOffline(4)   --  card is pulled out or card not plugged in, but 
                             added to agent's database only.
          configuring(5) --  card plugged in, but it is configuring.
          configFailed(6)--  card plugged in, but configuration failed.
          typeMismatch(7)--  card plugged in, but it's type is mismatch.
          deactived(8)   --  card plugged in, but it is deactivated by a 
                             manager.
          faulty(9)      --  fault occurs when card is running normally
          invalid(10)    --  invalid card instance, such as adding card failed.
          noPower(11)    --  power card plugged in, but no power input.
          unauthorized(12) --  card plugged in, but it's bugsell and the 
                               software of the card doesn't run now.
          powerSaving(34)  --  card plugged in, but it's power saving status.          
        "
        ::=  {  zxAnCardEntry  5  }

    zxAnCardAdminStatus         OBJECT-TYPE 
        SYNTAX          INTEGER
            {
                reset(1),
                switch(2),
                stopService(3),
                active(4),
                deactive(5)
            }
        MAX-ACCESS      read-create
        STATUS          current
        DESCRIPTION     "This MIB is defined for the card admin status on the 
                         card. For example:reset(1),switch(2)
                         
                         reset(1)    -- reset the card.
                         switch(2)   -- switch card between master and slave
                                        status.
                         stopService(3) -- stop service normally.
                         active(4)   -- activate this card and enable the 
                                        service.
                         deactive(5) -- deactivate this card and disable the 
                                        service forcedly.
                         "
        ::=  {  zxAnCardEntry  6  }

    zxAnCardPortNums            OBJECT-TYPE 
        SYNTAX          Integer32
        MAX-ACCESS      read-only
        STATUS          current
        DESCRIPTION     "The numbers of physical port which contained 
                        in this board.
                        If the board has no this attribute,it should be 0."
        ::=  {  zxAnCardEntry  7  }

    zxAnCardActivePortNums      OBJECT-TYPE 
        SYNTAX          Integer32
        MAX-ACCESS      read-only
        STATUS          current
        DESCRIPTION     "The numbers of actived physical port which contained 
                        in this board.
                        If the board has no this attribute,it should be 0."
                    
        ::=  {  zxAnCardEntry  8  }

    zxAnCardCpuLoad             OBJECT-TYPE 
        SYNTAX          Integer32 (0..100)
        UNITS           "percent"
        MAX-ACCESS      read-only
        STATUS          current
        DESCRIPTION     "The current CPU load of this board.If this board has
                        more than one CPU,the average value is allowed.
                        If the board has no this attribute,it should be 0."
        ::=  {  zxAnCardEntry  9  }


    zxAnCardCpuLoadThreshold    OBJECT-TYPE 
        SYNTAX          Integer32 (1..100)
        UNITS           "percent"
        MAX-ACCESS      read-create
        STATUS          current
        DESCRIPTION     "The CPU load threshold of this board.When 
                        zxAnCardCpuLoad  is  higher than 
                        zxAnCardCpuLoadThreshold,zxAnChassisCardCpuOverloadAlm 
                        trap should be generated by agent."
        ::=  {  zxAnCardEntry  10  }


    zxAnCardMemUsage            OBJECT-TYPE 
        SYNTAX          Integer32 (0..100)
        UNITS           "percent"
        MAX-ACCESS      read-only
        STATUS          current
        DESCRIPTION     "The current memory usage of this board.
                        If the board has no this attribute,it should be 0."
        ::=  {  zxAnCardEntry  11  }


    zxAnCardMemUsageThreshold   OBJECT-TYPE 
        SYNTAX          Integer32 (1..100)
        UNITS           "percent"
        MAX-ACCESS      read-create
        STATUS          current
        DESCRIPTION     "The memory usage threshold of this board. When 
                        zxAnCardMemUsage is higher than 
                        zxAnCardMemUsageThreshold,zxAnChassisCardMemOverloadAlm
                        trap should be generated by agent."
        ::=  {  zxAnCardEntry  12  }
                
    zxAnCardStandbyStatus       OBJECT-TYPE 
        SYNTAX          INTEGER
            {
             main(1),
             standby(2),
             unknown(15)             
            }
        MAX-ACCESS      read-only
        STATUS          current
        DESCRIPTION     "The card operation status on the card."
        ::=  {  zxAnCardEntry  13  }

    zxAnCardInvSn               OBJECT-TYPE 
        SYNTAX          DisplayString  ( SIZE ( 0 .. 32  ) )
        MAX-ACCESS      read-create
        STATUS          current
        DESCRIPTION     "The serial number of this card.
                        it is used by inventroy management."
        ::=  {  zxAnCardEntry  14  }


    zxAnCardCleiCode            OBJECT-TYPE 
        SYNTAX          DisplayString  ( SIZE ( 0 .. 64  ) )
        MAX-ACCESS      read-only
        STATUS          current
        DESCRIPTION     "The CLEI code of this card.
                        it is used by inventroy management.Please reference 
                        http://www.commonlanguage.com to get knowledge about
                        CLEI code."
        REFERENCE "http://www.commonlanguage.com"              
        ::=  {  zxAnCardEntry  15  }


    zxAnCardAccessoriesType     OBJECT-TYPE 
        SYNTAX          DisplayString  ( SIZE ( 0 .. 64  ) )
        MAX-ACCESS      read-only
        STATUS          current
        DESCRIPTION     "The accessories type of this card, such as splitter 
                        of DSLAM,the value of this variable should be the type 
                        of hardware, eg. PNVTA,PNVNP,PNVNA of ZXDSL9800's 
                        splitter."
        ::=  {  zxAnCardEntry  16  }


    zxAnCardAccessoriesOperStatus       OBJECT-TYPE 
        SYNTAX          INTEGER
            {
             up(1),
             down(2),
             testing(3),
             unknow(4)
            }        
        MAX-ACCESS      read-only
        STATUS          current
        DESCRIPTION     "The operational status of the card accessories."
        ::=  {  zxAnCardEntry  17  }


    zxAnCardMemSize             OBJECT-TYPE 
        SYNTAX          Integer32
        UNITS           "MB"
        MAX-ACCESS      read-only
        STATUS          current
        DESCRIPTION     "The current memory size of this board.
                    If the board has no this attribute,it should be 0."
        ::=  {  zxAnCardEntry  19  }


   zxAnCardAvailableStorageSize OBJECT-TYPE 
        SYNTAX          Integer32
        UNITS           "KB"        
        MAX-ACCESS      read-only
        STATUS          current
        DESCRIPTION     "The available storage space size in this card."
        ::=  {  zxAnCardEntry  21 }             


   zxAnCardTotalStorageSize     OBJECT-TYPE 
        SYNTAX          Integer32
        UNITS           "KB"        
        MAX-ACCESS      read-only
        STATUS          current
        DESCRIPTION     "The total storage space size in this card."
        ::=  {  zxAnCardEntry  22 }      
    
    zxAnCardHardwareVersion     OBJECT-TYPE 
        SYNTAX          DisplayString  ( SIZE ( 0 .. 64  ) )
        MAX-ACCESS      read-only
        STATUS          current
        DESCRIPTION     "The hard version in this card."
        ::=  {  zxAnCardEntry  23  }
        
    zxAnCardPowerSavingEnable  OBJECT-TYPE 
        SYNTAX          INTEGER {
            enabled(1),
            disabled(2)
        }         
        MAX-ACCESS      read-create
        STATUS          current
        DESCRIPTION     "Enable or disable the power saving of the card."
        DEFVAL  { disabled }
        ::=  {  zxAnCardEntry  24  }    

    zxAnCardLastStartupTime     OBJECT-TYPE 
        SYNTAX          DateAndTime
        MAX-ACCESS      read-only
        STATUS          current
        DESCRIPTION     "The last startup time of the card."
        ::=  {  zxAnCardEntry  25  }
        
    zxAnCardCpldVersion    OBJECT-TYPE 
        SYNTAX          DisplayString  ( SIZE ( 0 .. 64  ) )
        MAX-ACCESS      read-only
        STATUS          current
        DESCRIPTION     "The CPLD version in this card."
        ::=  {  zxAnCardEntry  26  }
        
    zxAnCardFirmwareVersion    OBJECT-TYPE 
        SYNTAX          DisplayString  ( SIZE ( 0 .. 64  ) )
        MAX-ACCESS      read-only
        STATUS          current
        DESCRIPTION     "The firmware version in this card."
        ::=  {  zxAnCardEntry  27  }

    zxAnCardOtherFirmwareVersions    OBJECT-TYPE
        SYNTAX          DisplayString  ( SIZE ( 0 .. 64  ) )
        MAX-ACCESS      read-only
        STATUS          current
        DESCRIPTION     "The other firmware versions in this card."
        ::=  {  zxAnCardEntry  28  }
        
    zxAnCardRowStatus   OBJECT-TYPE 
        SYNTAX          RowStatus
        MAX-ACCESS      read-create
        STATUS          current
        DESCRIPTION     "The status of this conceptual row.

                        To create a row in this table, a manager must
                        set this object to createAndGo(4).
                       
                        In particular, a newly created row cannot be created
                        until the corresponding zxAnExampleFunc2Xxx1Var1
                        and zxAnExampleFunc2Xxx1Var2 have been set.
                        
                        To delete a row in this table, a manager must
                        sets this object to destroy(6). "
        ::=  {  zxAnCardEntry  50  }     

-------------------------------------------------------------------------------
-- 4.Subcard properties table
-------------------------------------------------------------------------------
    zxAnSubcardTable   OBJECT-TYPE
        SYNTAX      SEQUENCE  OF  ZxAnSubcardEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION "This table includes the enable or disable plug and play of 
                    the subcard."
        ::=  { zxAnChassisObjects  5 }

    zxAnSubcardEntry   OBJECT-TYPE
        SYNTAX      ZxAnSubcardEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION "An entry in zxAnSubcardTable."
        INDEX       {  zxAnRack,zxAnShelf,zxAnSlot,zxAnSubcard  }
        ::=  { zxAnSubcardTable 1 }

    ZxAnSubcardEntry  ::=  SEQUENCE {
        zxAnSubcard                Integer32,        
        zxAnSubcardConfMainType    Integer32,
        zxAnSubcardActualMainType  Integer32,
        zxAnSubcardActualType      DisplayString,
        zxAnSubcardOperStatus      INTEGER,
        zxAnSubcardAdminStatus     INTEGER,
        zxAnSubcardPortNums        Integer32,
        zxAnSubcardActivePortNums  Integer32,
        zxAnSubcardCpuLoad         Integer32,
        zxAnSubcardMemUsage        Integer32,   
        zxAnSubcardInvSn           DisplayString,
        zxAnSubcardCleiCode        DisplayString,
        zxAnSubcardMemSize         Integer32,
        zxAnSubcardHardwareVersion  DisplayString,
        zxAnSubcardRowStatus       RowStatus
        }

    zxAnSubcard         OBJECT-TYPE 
        SYNTAX          Integer32
        MAX-ACCESS      not-accessible
        STATUS          current
        DESCRIPTION     ""
        ::=  {  zxAnSubcardEntry  1  }
        

    zxAnSubcardConfMainType         OBJECT-TYPE 
        SYNTAX          Integer32
        MAX-ACCESS      read-create
        STATUS          current
        DESCRIPTION     "The main subcard type to config on the slot.  Main 
                        subcard type indicates the category of hardware,such
                        as 4-ports ethernet subcard."
        ::=  {  zxAnSubcardEntry  2  }


    zxAnSubcardActualMainType     OBJECT-TYPE 
        SYNTAX          Integer32
        MAX-ACCESS      read-only
        STATUS          current
        DESCRIPTION     "The actually main subcard type on the slot."
        ::=  {  zxAnSubcardEntry  3  }


    zxAnSubcardActualType     OBJECT-TYPE 
        SYNTAX          DisplayString  ( SIZE ( 0 .. 32  ) ) 
        MAX-ACCESS      read-only
        STATUS          current
        DESCRIPTION     "The actually subcard type on the slot. It indicates 
                        the type of detailed hardware.
           
                        NOTE: The value of this variable MUST abide by ZTE'S  
                        discipline for card naming.And It MUST capital letters. 
                        "
        ::=  {  zxAnSubcardEntry  4  }


    zxAnSubcardOperStatus  OBJECT-TYPE 
        SYNTAX          INTEGER
            {
             inService   (1),
             notInService(2),
             hwOnline(3),
             hwOffline(4),
             configuring(5),
             configFailed(6),
             typeMismatch(7),
             deactived(8),
             faulty(9),
             invalid(10)             
            }
        MAX-ACCESS      read-only
        STATUS          current
        DESCRIPTION     "This MIB is defined for the sub card status on the 
                        card.

          inService(1)   --  card pluged in,running normally and service is 
                             being provided normally.
          notInService(2)--  card pluged in,running normally but service is 
                             stopped.
          hwOffline(3)   --  card not pluged in,but added to agent's database 
                             only
          hwOnline(4)    --  card pluged in,but software isn't running now.
          configuring(5) --  card pluged in,but it is configuring
          configFailed(6)--  card pluged in,but configuration failed
          typeMismatch(7)--  card pluged in,but it's type is mismatch
          deactived(8)   --  card pluged in,but it is deactivated by a manager
          faulty(9)      --  fault occurs when card is running normally
          invalid(10)    --  invalid card instance,such as adding card failed.    
        "
        ::=  {  zxAnSubcardEntry  5  }

    zxAnSubcardAdminStatus    OBJECT-TYPE 
        SYNTAX          INTEGER
            {
                reset(1),
                switch(2),
                stopService(3),
                active(4),
                deactive(5)
            }
        MAX-ACCESS      read-create
        STATUS          current
        DESCRIPTION     "This MIB is defined for the card admin status on the 
                         card. For example:reset(1),switch(2)
                         
                         reset(1)    -- reset the card.
                         switch(2)   -- switch card between master and slave 
                                        status.
                         stopService(3) -- stop service normally.
                         active(4)   -- activate this card and enable the 
                                        service.
                         deactive(5) -- deactivate this card and disable the 
                                        service forcedly.
                         "
       ::=  {  zxAnSubcardEntry  6  }  



    zxAnSubcardPortNums OBJECT-TYPE 
        SYNTAX          Integer32
        MAX-ACCESS      read-only
        STATUS          current
        DESCRIPTION     "The numbers of physical port which contained in this
                        board.
                    If the board has no this attribute,it should be 0."
        ::=  {  zxAnSubcardEntry  7  }

    zxAnSubcardActivePortNums   OBJECT-TYPE 
        SYNTAX          Integer32
        MAX-ACCESS      read-only
        STATUS          current
        DESCRIPTION     "The numbers of actived physical port which contained 
                        in this board.
                        If the board has no this attribute,it should be 0."
                    
        ::=  {  zxAnSubcardEntry  8  }

    zxAnSubcardCpuLoad  OBJECT-TYPE 
        SYNTAX          Integer32
        UNITS           "percent"
        MAX-ACCESS      read-only
        STATUS          current
        DESCRIPTION     "The current CPU load of this board.If this board has
                        more than one CPU,the average value is allowed.
                        If the board has no this attribute,it should be 0."
        ::=  {  zxAnSubcardEntry  9  }

    zxAnSubcardMemUsage OBJECT-TYPE 
        SYNTAX          Integer32
        UNITS           "percent"
        MAX-ACCESS      read-only
        STATUS          current
        DESCRIPTION     "The current memory usage of this board.
                        If the board has no this attribute,it should be 0."
        ::=  {  zxAnSubcardEntry  10  }


    zxAnSubcardInvSn     OBJECT-TYPE 
        SYNTAX          DisplayString  ( SIZE ( 0 .. 64  ) )
        MAX-ACCESS      read-create
        STATUS          current
        DESCRIPTION     "The serial number of this subcard.
                        it is used by inventroy management."
        ::=  {  zxAnSubcardEntry  11  }


    zxAnSubcardCleiCode     OBJECT-TYPE 
        SYNTAX          DisplayString  ( SIZE ( 0 .. 64  ) )
        MAX-ACCESS      read-only
        STATUS          current
        DESCRIPTION     "The CLEI code of this card.
                        it is used by inventroy management.Please reference 
                        http://www.commonlanguage.com to get knowledge about 
                        CLEI code."
        REFERENCE "http://www.commonlanguage.com"              
        ::=  {  zxAnSubcardEntry  12  }


    zxAnSubcardMemSize OBJECT-TYPE 
        SYNTAX          Integer32
        UNITS           "MB"
        MAX-ACCESS      read-only
        STATUS          current
        DESCRIPTION     "The current memory size of this sub card.
                        If the board has no this attribute,it should be 0."
        ::=  {  zxAnSubcardEntry  13  }

    zxAnSubcardHardwareVersion OBJECT-TYPE 
        SYNTAX          DisplayString  ( SIZE ( 0 .. 64  ) )
        MAX-ACCESS      read-only
        STATUS          current
        DESCRIPTION     "The hard version in this sub card."
        ::=  {  zxAnSubcardEntry  14  }
        
    zxAnSubcardRowStatus  OBJECT-TYPE 
        SYNTAX          RowStatus
        MAX-ACCESS      read-create
        STATUS          current
        DESCRIPTION     "The row status of this entry."
        ::=  {  zxAnSubcardEntry  50  }

-------------------------------------------------------------------------------
-- 5. PNP mode
-------------------------------------------------------------------------------
           
-------------------------------------------------------------------------------
-- 6. Card CPU Properties Table
-------------------------------------------------------------------------------
    zxAnCardCpuTable   OBJECT-TYPE
        SYNTAX      SEQUENCE  OF  ZxAnCardCpuEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION 
            "This table includes the CPU information of the card."
        ::=  { zxAnChassisObjects  6 }

    zxAnCardCpuEntry   OBJECT-TYPE
        SYNTAX      ZxAnCardCpuEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION
            "An entry in zxAnCardCpuTable."
        INDEX   { zxAnRack, 
                  zxAnShelf,
                  zxAnSlot,
                  zxAnCardCpuId
                }
        ::=  { zxAnCardCpuTable 1 }

    ZxAnCardCpuEntry  ::=  SEQUENCE {
        zxAnCardCpuId      Integer32,
        zxAnCardCpuUsage   Integer32
        }

    zxAnCardCpuId   OBJECT-TYPE
        SYNTAX      Integer32
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION     
            "The CPU ID of the card."
        ::= { zxAnCardCpuEntry 1 }

    zxAnCardCpuUsage   OBJECT-TYPE
        SYNTAX          Integer32(0..100)
        UNITS           "percent"
        MAX-ACCESS      read-only
        STATUS          current
        DESCRIPTION     
            "The CPU usage of the zxAnCardCpuId."
        ::= { zxAnCardCpuEntry  2  }

-------------------------------------------------------------------------------
-- 7. Storage Device Properties Table
-------------------------------------------------------------------------------
    zxAnStorageDeviceTable   OBJECT-TYPE
        SYNTAX      SEQUENCE  OF  ZxAnStorageDeviceEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION "This table includes file storage devices information."
        ::=  { zxAnChassisObjects 7 }

    zxAnStorageDeviceEntry   OBJECT-TYPE
        SYNTAX      ZxAnStorageDeviceEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION "An entry in zxAnStorageDeviceTable."
        INDEX   {zxAnRack, 
                 zxAnShelf,
                 zxAnSlot,
                 zxAnStorageDeviceId}
        ::=  { zxAnStorageDeviceTable 1 }

    ZxAnStorageDeviceEntry  ::=  SEQUENCE {    
        zxAnStorageDeviceId                  Integer32,
        zxAnStorageDeviceAccessEnable        INTEGER,
        zxAnStorageDeviceOperStatus          INTEGER,
        zxAnStorageDeviceAccessStatus        INTEGER,
        zxAnStorageDeviceTotalSpace          Integer32,
        zxAnStorageDeviceAvailableSpace      Integer32
    }

    zxAnStorageDeviceId  OBJECT-TYPE
        SYNTAX      Integer32
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION 
            "The ID of the storage device. 
             The numbering rule is:
             1: Flash1,
             2: SD card,
             3: RAM card,
             4: Flash2,
             ...
            "
        ::= { zxAnStorageDeviceEntry 1 }

    zxAnStorageDeviceAccessEnable  OBJECT-TYPE 
        SYNTAX      INTEGER{
            enabled(1),
            disabled(2)
        }
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION  
            "Enables and disables the access permissions to the storage device.
             If the storage device is disabled, the storage device can't be read
             or written."
        ::= { zxAnStorageDeviceEntry 2 }

    zxAnStorageDeviceOperStatus  OBJECT-TYPE 
        SYNTAX      INTEGER{
            online(1),
            offline(2)
        }
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION  
            "The operational status of the storage device."
        ::= { zxAnStorageDeviceEntry 3 }
    
    zxAnStorageDeviceAccessStatus  OBJECT-TYPE
        SYNTAX      INTEGER{
            idle(1),
            busy(2),
            locked(3),
            unknown(255)
        }
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION 
            "The access status of the storage device.
             idle(1):      the storage device can be read or written.
             busy(2):      the storage device is being read or written. 
             locked(3):    the storage device can be read, but can't be written.
             unknown(255): unknown."
        ::= { zxAnStorageDeviceEntry 4 }

    zxAnStorageDeviceTotalSpace  OBJECT-TYPE 
        SYNTAX      Integer32
        UNITS       "MB"
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION "The total space of the storage device."
        ::= { zxAnStorageDeviceEntry 5 }

    zxAnStorageDeviceAvailableSpace  OBJECT-TYPE 
        SYNTAX      Integer32
        UNITS       "MB"
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION "The available space of the storage device."
        ::= { zxAnStorageDeviceEntry 6 }

-------------------------------------------------------------------------------
-- 21 zxAnChassisSysTraps
-------------------------------------------------------------------------------

    zxAnChassisCtrlCardSwappedAlm NOTIFICATION-TYPE
        OBJECTS { zxAnCardOperStatus,zxAnChassisSysLastSwapReason }
        STATUS  current
        DESCRIPTION
            "A zxAnChassisCtrlCardSwappedAlm trap indicates that the main 
            control card has swapped to slave card."
        ::= { zxAnChassisSysTraps 2 }

    zxAnChassisCtrlCardSwappedClr NOTIFICATION-TYPE
        STATUS  current
        DESCRIPTION
            "A zxAnChassisCtrlCardSwappedClr trap indicates that the main
            control card swapped trap has cleared."
        ::= { zxAnChassisSysTraps 3 }           


--------------------------------------------------------------------------------
-- 22 zxAnChassisCardTraps
--------------------------------------------------------------------------------

       
    zxAnChassisCardOffline NOTIFICATION-TYPE
        OBJECTS { zxAnCardConfMainType,zxAnCardActualMainType,
                  zxAnCardActualType,zxAnCardAdminStatus, 
                  zxAnCardOperStatus,zxAnCardInvSn }
        STATUS  current
        DESCRIPTION
            "A zxAnChassisCardOffline trap is sent when the agent
             has detected that the configured card has plugged out."
       ::= { zxAnChassisCardTraps 1 }
       
    zxAnChassisCardOnline NOTIFICATION-TYPE
        OBJECTS { zxAnCardConfMainType,zxAnCardActualMainType,
                  zxAnCardActualType, zxAnCardAdminStatus, zxAnCardOperStatus,
                  zxAnCardInvSn }
        STATUS  current
        DESCRIPTION
            "A zxAnChassisCardOnline trap is sent when the agent
             has detected that the configured card has plugged in."
       ::= { zxAnChassisCardTraps 2 }


    zxAnChassisCardTypeMismatchAlm NOTIFICATION-TYPE
        OBJECTS { zxAnCardConfMainType,zxAnCardActualMainType,
                  zxAnCardActualType,zxAnCardAdminStatus, zxAnCardOperStatus,
                  zxAnCardInvSn }
        STATUS  current
        DESCRIPTION
            "A zxAnChassisCardTypeMismatchAlm trap is sent when the agent
             has detected that the card has plugged in ,but 
             zxAnCardConfMainType is not same as zxAnCardActualType."
       ::= { zxAnChassisCardTraps 3 }
       
    zxAnChassisCardTypeMismatchClr NOTIFICATION-TYPE
        OBJECTS { zxAnCardConfMainType,zxAnCardActualMainType,
                  zxAnCardActualType,zxAnCardAdminStatus, zxAnCardOperStatus,
                  zxAnCardInvSn }
        STATUS  current
        DESCRIPTION
            "A zxAnChassisCardTypeMismatchClr trap is sent when the agent
             has detected that the card has plugged in and 
             zxAnCardConfMainType is same as zxAnCardActualType.
            "
       ::= { zxAnChassisCardTraps 4 }
                      

    zxAnChassisCardNotRunningAlm NOTIFICATION-TYPE
        OBJECTS { zxAnCardConfMainType,zxAnCardActualMainType,
                  zxAnCardActualType,zxAnCardAdminStatus, zxAnCardOperStatus,
                  zxAnCardInvSn }
        STATUS  current
        DESCRIPTION
            "A zxAnChassisCardNotRunningAlm trap is sent when the agent has 
            detected that the card has plugged in and configured, but it is not
            running."
       ::= { zxAnChassisCardTraps 5 }
       
    zxAnChassisCardNotRunningClr NOTIFICATION-TYPE
        OBJECTS { zxAnCardConfMainType,zxAnCardActualMainType,
                  zxAnCardActualType,zxAnCardAdminStatus, zxAnCardOperStatus,
                  zxAnCardInvSn }
        STATUS  current
        DESCRIPTION
            "A zxAnChassisCardNotRunningClr trap is sent when the agent
             has detected that the card is inservice.
            "
       ::= { zxAnChassisCardTraps 6 }


    zxAnChassisCardNotConfiguredAlm NOTIFICATION-TYPE
        OBJECTS { zxAnCardConfMainType,zxAnCardActualMainType,
                  zxAnCardActualType,zxAnCardAdminStatus, zxAnCardOperStatus,
                  zxAnCardInvSn }
        STATUS  current
        DESCRIPTION
           "A zxAnEquipCardNotConfigured trap is sent when the agent
             has detected that the card has plugged in but 
             not configured."
       ::= { zxAnChassisCardTraps 7 }
       
    zxAnChassisCardNotConfiguredClr NOTIFICATION-TYPE
        OBJECTS { zxAnCardConfMainType,zxAnCardActualMainType,
                  zxAnCardActualType,zxAnCardAdminStatus, zxAnCardOperStatus,
                  zxAnCardInvSn }
        STATUS  current
        DESCRIPTION
            "A zxAnChassisCardNotConfiguredClr trap is sent when the agent
             has detected that the card has plugged in and 
              configured.
            "
       ::= { zxAnChassisCardTraps 8 }
       
                      
    zxAnChassisCardCpuOverloadAlm NOTIFICATION-TYPE
        OBJECTS { zxAnCardCpuLoad, zxAnCardCpuLoadThreshold }
        STATUS  current
        DESCRIPTION
            "It indicates that the agent has detected that the
            zxAnChassisCardCPULoad object of one card has exceeded the 
            configured threshhold value of zxAnCardCpuLoadThreshhold."
       ::= { zxAnChassisCardTraps 20 }
    
    
    zxAnChassisCardCpuOverloadClr NOTIFICATION-TYPE
        OBJECTS { zxAnCardCpuLoad, zxAnCardCpuLoadThreshold }
        STATUS  current
        DESCRIPTION
            "It indicates that the agent has detected that the
            zxAnChassisCardCPULoad object of one card has less than the 
            configured threshhold value of zxAnCardCpuLoadThreshhold."
       ::= { zxAnChassisCardTraps 21 }
              
    zxAnChassisCardMemOverloadAlm NOTIFICATION-TYPE
        OBJECTS { zxAnCardMemUsage, zxAnCardMemUsageThreshold }
        STATUS  current
        DESCRIPTION
            "It indicates that the agent has detected that the
            zxAnChassisCardMemUsage object of one card has exceeded the 
            configured threshhold value of zxAnCardMemUsageThreshhold."
       ::= { zxAnChassisCardTraps 22 }
    
    zxAnChassisCardMemOverloadClr NOTIFICATION-TYPE
        OBJECTS { zxAnCardMemUsage, zxAnCardMemUsageThreshold }
        STATUS  current
        DESCRIPTION
            "It indicates that the agent has detected that the
            zxAnChassisCardMemUsage object of one card has less than the 
            configured threshhold value of zxAnCardMemUsageThreshhold."
       ::= { zxAnChassisCardTraps 23 }  

    zxAnChassisCardResourceAdded NOTIFICATION-TYPE
        OBJECTS { zxAnCardConfMainType, 
                  zxAnCardActualMainType,
                  zxAnCardPortNums,
                  zxAnSwCardVersion,
                  zxAnCardHardwareVersion
                }
        STATUS  current
        DESCRIPTION
            "A zxAnChassisCardResourceAdded trap is sent when the agent has 
             detected that the card has come into inService status."
       ::= { zxAnChassisCardTraps 24 } 
       
    zxAnChassisCardResourceDeleted NOTIFICATION-TYPE
        OBJECTS { zxAnCardConfMainType, 
                  zxAnCardActualMainType,
                  zxAnCardPortNums,
                  zxAnSwCardVersion,
                  zxAnCardHardwareVersion
                }
        STATUS  current
        DESCRIPTION
            "A zxAnChassisCardResourceDeleted trap is sent when the agent has
             detected that the card has been deleted."
       ::= { zxAnChassisCardTraps 25 } 

--------------------------------------------------------------------------------
-- 23. zxAnChassisSubcardTraps
--------------------------------------------------------------------------------
    
    zxAnChassisSubcardDown NOTIFICATION-TYPE
        OBJECTS { zxAnSubcardConfMainType, zxAnSubcardActualMainType, 
                  zxAnSubcardOperStatus }
        STATUS  current
        DESCRIPTION
            "It indicates that the agent has detected that the
             subcard operational status is abnormal."
   ::= { zxAnChassisSubcardTraps 1 }

    zxAnChassisSubcardUp NOTIFICATION-TYPE
        OBJECTS { zxAnSubcardConfMainType,zxAnSubcardActualMainType, 
                  zxAnSubcardOperStatus }
        STATUS  current
        DESCRIPTION
            "It indicates that the agent has detected that the
             subcard has been online and come into inservice status."
       ::= { zxAnChassisSubcardTraps 2 }

-------------------------------------------------------------------------------
-- 31. zxAnChassisConformance
-------------------------------------------------------------------------------
    zxAnChassisConformance  OBJECT IDENTIFIER ::= { zxAnChassisMib         4  }
                                                    
    zxAnChassisCompliances  OBJECT IDENTIFIER ::= { zxAnChassisConformance 1  }
    zxAnChassisGroups       OBJECT IDENTIFIER ::= { zxAnChassisConformance 2  }
    
    zxAnChassisCompliance MODULE-COMPLIANCE
        STATUS current
        DESCRIPTION 
            "The compliance statement for SNMP entities which implement the
            ZTE-AN-CHASSIS-MIB."
        MODULE -- this module
        
            MANDATORY-GROUPS { 
                  zxAnChassisSysMgmtGroup,
                  zxAnChassisRackMgmtGroup,
                  zxAnChassisShelfMgmtGroup,
                  zxAnChassisCardMgmtGroup,
                  zxAnChassisSubCardMgmtGroup,
                  zxAnChassisSysTrapsGroup,
                  zxAnChassisCardTrapsGroup
                }
        ::= { zxAnChassisCompliances 1 }

    zxAnChassisSysMgmtGroup OBJECT-GROUP
        OBJECTS { zxAnChassisSysReboot,
                  zxAnChassisSysLastRebootReason,
                  zxAnChassisSysLastSwapReason,
                  zxAnChassisPnpMode
        }
        STATUS current
        DESCRIPTION 
            "The notifications which indicate reboot,set-pnp and last reboot or 
            swap reason."
        ::= { zxAnChassisGroups 1 }  

    zxAnChassisRackMgmtGroup OBJECT-GROUP
        OBJECTS { zxAnRackActualType, 
                  zxAnRackConfType, 
                  zxAnRackInvSn, 
                  zxAnRackRowStatus
        }
        STATUS current
        DESCRIPTION 
            "The collection of objects which are used to represent rack 
            information and to manage rack."
        ::= { zxAnChassisGroups 2 }

    zxAnChassisShelfMgmtGroup OBJECT-GROUP
        OBJECTS { zxAnShelfHardwareVersion, 
                  zxAnShelfActualType, 
                  zxAnShelfConfType,
                  zxAnShelfInvSn, 
                  zxAnShelfCleiCode, 
                  zxAnLogicShelfNo, 
                  zxAnShelfRowStatus
        }
        STATUS current
        DESCRIPTION 
            "The collection of objects which are used to represent shelf 
            information and to manage shelf."
        ::= { zxAnChassisGroups 3 }
        
    zxAnChassisCardMgmtGroup OBJECT-GROUP
        OBJECTS { zxAnCardConfMainType, 
                  zxAnCardActualMainType,
                  zxAnCardActualType, 
                  zxAnCardOperStatus,
                  zxAnCardAdminStatus, 
                  zxAnCardPortNums, 
                  zxAnCardActivePortNums, 
                  zxAnCardCpuLoad,
                  zxAnCardCpuLoadThreshold, 
                  zxAnCardMemUsage, 
                  zxAnCardMemUsageThreshold,
                  zxAnCardStandbyStatus, 
                  zxAnCardInvSn, 
                  zxAnCardCleiCode, 
                  zxAnCardAccessoriesType,
                  zxAnCardAccessoriesOperStatus, 
                  zxAnCardMemSize,
                  zxAnCardAvailableStorageSize, 
                  zxAnCardTotalStorageSize,
                  zxAnCardHardwareVersion, 
                  zxAnCardRowStatus
        }
        STATUS current
        DESCRIPTION 
            "The collection of objects which are used to represent card 
            information and to manage card."
        ::= { zxAnChassisGroups 4 }
        
    zxAnChassisSubCardMgmtGroup OBJECT-GROUP
        OBJECTS { zxAnSubcardConfMainType,
                  zxAnSubcardActualMainType,
                  zxAnSubcardActualType,
                  zxAnSubcardOperStatus,
                  zxAnSubcardAdminStatus,
                  zxAnSubcardPortNums,
                  zxAnSubcardActivePortNums,
                  zxAnSubcardCpuLoad,
                  zxAnSubcardMemUsage,   
                  zxAnSubcardInvSn,
                  zxAnSubcardCleiCode,
                  zxAnSubcardMemSize,
                  zxAnSubcardHardwareVersion,
                  zxAnSubcardRowStatus
        }
        STATUS current
        DESCRIPTION 
            "The collection of objects which are used to represent subcard 
            information and to manage subcard."
        ::= { zxAnChassisGroups 5 }  
            
    zxAnChassisSysTrapsGroup OBJECT-GROUP
        OBJECTS { zxAnChassisCtrlCardSwappedAlm,
                  zxAnChassisCtrlCardSwappedClr
        }
        STATUS current
        DESCRIPTION 
            "The notifications which indicate swap information."
        ::= { zxAnChassisGroups 6 }   
                                
    zxAnChassisCardTrapsGroup OBJECT-GROUP
        OBJECTS { zxAnChassisCardOffline,
                  zxAnChassisCardOnline,
                  zxAnChassisCardTypeMismatchAlm,
                  zxAnChassisCardTypeMismatchClr,
                  zxAnChassisCardNotConfiguredAlm,
                  zxAnChassisCardNotConfiguredClr,
                  zxAnChassisCardNotRunningAlm,
                  zxAnChassisCardNotRunningClr,
                  zxAnChassisCardCpuOverloadAlm,
                  zxAnChassisCardCpuOverloadClr,
                  zxAnChassisCardMemOverloadAlm,
                  zxAnChassisCardMemOverloadClr,
                  zxAnChassisCardResourceAdded,
                  zxAnChassisCardResourceDeleted
        }
        STATUS current
        DESCRIPTION 
            "The notifications which indicate specific changes, include card 
            status,  card cpu load status and memory load status."
        ::= { zxAnChassisGroups 7 }   
     
END
